高聚物与光场相互作用的微观机制

分析光场与高聚物相互作用的微观机制，介绍高分子与小分子在光场作用下的极化过程。对在窄束光场作用下，高分子链极化后链上各处极化程度的分布情况进行研究，指出对于高度拉伸的聚合物薄膜，电偶极子模型不适合准确解释高分子与光场相互作用的微观机制。为此，采用符合实际的天线模型分析高分子天线与窄束光场的相互作用，从理论上推导出天线模型高分子链上一小段的极化公式，并用离散变分方法——DVM（discrete variational method）计算一个高分子链的极化分布，验证了文中推导出的分式的合理性。最后，将极化分布看作是电流在天线上的分布，计算了天线的次级辐射在空间中的角分布，得到天线模型对电偶极子模型的修正因子。     

HL-1M装置等离子体与ICRH发射天线的相互作用

ICRH实验的一个比较突出的问题就是杂质。杂质的产生与ICRH发射天线同等离子体的相互作用和RF脉冲的发射有着不可忽视的联系。对HL－1M装置的ICRH发射天线在两年多实验中的变化作了简要的介绍和讨论，并对今后ICRH发射天线的设计提出了一些建议。     

Synthesis and characterization of polyaniline/graphite conducting nanocomposites

A new method for the synthesis of exfoliated graphite and polyaniline (PANI)/graphite nanocomposites was developed. Exfoliated graphite nanosheets were prepared through the microwave irradiation and sonication of synthesized expandable graphite. The nanocomposites were fabricated via the in situ polymerization of the monomer at the presence of graphite nanosheets. The as-synthesized graphite nanosheets and PANI/graphite nanocomposite materials were characterized with Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis (TGA). The conductivity of the PANI/graphite nanocomposites was dramatically increased over that of pure PANI. TGA indicated that the incorporation of graphite greatly improved the thermal stability of PANI. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1972–1978, 2004     

二茂铁在高温热解乙二胺制备CN_x纳米管过程中的催化性能研究

采用高温热解法 ,以二茂铁 乙二胺有机溶剂为前驱液制备CNx 纳米管过程中 ,改变前驱液配比 ,对 86 0℃ ,不同二茂铁含量条件下制备出的CNx 纳米管进行了产量统计、形貌结构观察和拉曼光谱研究。结果显示 :随着前躯液中二茂铁含量的相对增大 ,不但CNx 纳米管产量随之增加 ,而且产物中“竹节状”结构纳米管相对“中空”结构纳米管的比重也增大 ;拉曼光谱结果进一步证实了由于“竹节状”结构CNx 纳米管的含量或比重增加所带来的纳米管样品整体或平均含氮量的升高而导致的样品结晶有序程度的降低。对单独钴粉和二茂铁催化条件下生成CNx 纳米管的形貌观察进一步证实 :二茂铁在热解法制备“竹节状”结构CNx 纳米管过程中的浮动催化作用显著 ,有利于实现含氮量较高、结构均匀的CNx 纳米管的可控制生长。     

A Bicriterial Optimization Problem of Antenna Design

In this paper we consider a special optimization problem withtwo objectives which arises in antenna theory. It is shown that thisabstract bicriterial optimization problem has at least one solution.Discretized versions of this problem are also discussed, and therelationships between these finite dimensional problems and the infinitedimensional problem are investigated. Moreover, we presentnumerical results for special parameters using a multiobjectiveoptimization method.     

Design and Fabrication of Composite Smart Structures with High Electric and Mechanical Performances for Future Mobile Communication

In this paper, we have developed a load-bearing outer skin for antennas, which is termed a composite smart structure (CSS). The CSS is a multilayer composite sandwich structure in which antenna layers are inserted. A direct-feed stacked patch antenna is considered. A design procedure including the structure design, material selection, and design of antenna elements in order to obtain high electric and mechanical performances is presented. An optimized honeycomb thickness is selected for efficient radiation and impedance characteristics. High gain conditions can be obtained by placing the outer facesheet in the resonance position, which is at about a half wavelength distance from the ground plane. The measured electrical performances show that the CSS has a great bandwidth (over 10%) and a higher gain than an antenna without a facesheet and has excellent mechanical performances, owing to the composite laminates and honeycomb cores. The CSS concept can be extended to give a useful guide for manufacturers of structural body panels and for antenna designers.     

Photo-induced evolution of copper sheets from cluster molecules and its application to photolithographic copper patterning

UV photoexcitation of (t-butylethynyl copper)₂₄ cluster films induces segregation of the crystals into metallic and organic phases and leads to evolve the metallic sheets sandwiched by organic polymers. The growth of the metallic crystals in the plane of the photo-electromagnetic field is attributed due to plasmon-plasmon interaction among nanoparticles embedded in dielectric polymer matrices. The surface enhanced photochemical reaction of residual cluster molecules on the photon incident direction is expected to take an important role for joining the metal particles to produce a metallic sheet. We can apply this phenomenon for photolithographic copper pattern generation on a flexible base plate.     

Metallic nanoparticles on plasma treated carbon nanotubes: Nanohybrids

Multi-wall carbon nanotubes (MWCNTs) were decorated with metal clusters by thermal evaporation. Transmission electron microscopy (TEM) shows that the nature and extent of metal coverage can be varied by plasma treating the MWCNT surface. The metal clusters on oxygen plasma treated arc-discharge MWCNTs have a more dense distribution than the clusters evaporated on as-synthesized arc-discharge MWCNTs. In contrast, the plasma treatment did not affect the cluster distribution on CVD MWCNTs. Analyses of the valence band and the core levels by X-ray photoelectron spectroscopy suggest poor charge transfer between gold clusters and MWCNTs; on the contrary suggest good charge transfer between Ni clusters and MWCNTs.     

Broadband Analysis of Holographic Power Combining Circuits

Holography is a promising technique for power combining applications in the frequency range of short millimeter and submillimeter waves. In this paper, quasi-optical holographic power combining circuits are investigated. An equivalent network is utilized which rigorously models horn arrays and biperiodic dielectric structures in order to design computer-generated holograms. We apply the network model to a 5-element quasi-optical power combiner and demonstrate its capability. The hologram is designed for 150 GHz and has an efficiency of 92.5 % with a 90 % bandwidth of 5.3 %. With the aid of a broadband waveguide power divider and a vector field measurement system, the circuit is analyzed.     

Self-organized ZnAl2O4 nanostructures grown on -sapphire

Self-organized ZnAl₂O₄ nanostructures with the appearance (in SEM) of high aspect ratio horizontal nanowires are grown on uncatalysed c-sapphire by vapour phase transport. The nanostructures grow as three equivalent crystallographic variants on c-sapphire. Raman and cathodoluminescence spectroscopy confirm that the nanostructures are not ZnO and TEM shows that they are the cubic spinel, zinc aluminate, ZnAl₂O₄, formed by the reaction of Zn and O with the sapphire substrate.